Question: How To Mic An Orchestra For Live Sound?

How do mics in an orchestra live?

Engineers use a wide variety of techniques when recording orchestras or small ensembles, from simply placing one stereo microphone just above and behind the conductor’s head to using several spot mics for each instrument section in conjunction with one to several ambient microphones.

Which type of microphone is more suitable for recording an orchestra?

but in general you are looking to use condenser microphones. They are sensitive enough that at high gain they pick up everything. just make sure they are positioned away from noisy people. another way is to use omnidirectional condenser microphones of the small diaphragm variety.

What microphones do orchestras use?

In orchestral recordings, the main microphone is the so called Decca Tree, which is positionated a few meters over the conductor pointing towards the orchestra. The signal from these microphones is also the one that is used as fundament in the mix.

How many microphones do you need to record an orchestra?

It could be as few as five or six mics or up to as many as 18 or 20.

You might be interested:  Which Of The Following Instruments Was Not Used In The Baroque Orchestra?

Do orchestras use microphones?

Standard amplification Since the 1960s, music theatre companies have reinforced the sound of the orchestra by placing microphones on instruments and amplifying them through a public address system. While this results in a louder sound, it may not correctly reproduce the ensemble sound and instrument tone.

What is an outrigger mic?

The Decca Tree is a spaced microphone array most commonly used for orchestral recording. Two more microphones can be added and placed on the sides (called “outrigger microphones”), approximately at about 2/3 of the stage width, between the conductor and the outer orchestra boundary.

What is Ortf mic placement?

ORTF Mic Placement ORTF stands for Office de Radiodiffusion Télévision Française. As a near-coincident pair, the mic capsules are spaced 17 cm (~7 inches) apart and pointed outwards at a 110° angle.

How is classical music recorded?

Contemporary and classical music rely on the same basic fundamentals to bring the music to life—from the use of microphones and an audio interface/recording device to record the musical performance, the need for a mixer or a DAW to achieve the proper mix balance of the sound sources, all the way to the goal of

What type of polar pattern microphone is used for recording an orchestra?

If you want to record an orchestra that has a chorus behind it, the omnidirectional microphone would be quite suitable in this type of situation. However, the omnidirectional polar pattern, although it may seem the best option for any case, has its drawbacks, since it can pick up unwanted noise or instruments.

You might be interested:  Often asked: What Is A Chamber Orchestra?

How do you mic a percussion section?

Place the mike in front of the drum between 6″ to a foot away to start. You can work with the distance while playing, leaning closer in for emphasis and backing off for less level. If you want more attack sound, angle the mike toward the center of the head.

How do you mic a concert band?

Use two microphones on a bar on one stand, or two stands about 4 feet apart. Set the microphones about 15 feet high and 12-15 feet in front of the ensemble. Plug the left microphone (when facing the ensemble) into the left of the recorder. Check levels using the loudest passage of the piece.

Leave a Reply

Your email address will not be published. Required fields are marked *